When the "hot-dip galvanized steel wire mesh" is used in the high-rise brick pasting system for external wall insulation, the four corner mesh is laid in the anti crack mortar to effectively strengthen the anti crack protection layer of the external wall insulation bricks. Then, the hot-dip galvanized steel wire mesh is directly fixed to the structure through anchoring, transferring the surface layer load to the base wall. The insulation layer can also be effectively protected. When subjected to external forces, damage occurs in the anti crack protection layer and is absorbed by the anti crack protection layer. Due to the good adhesion between hot-dip galvanized steel wire mesh and cement anti cracking mortar, hot-dip galvanized steel wire mesh has a reasonable increase in tensile strength in both horizontal and vertical directions, greatly improving the strength of the brick bonding base layer. Therefore, adopting the "hot-dip galvanized steel wire mesh reinforced structure" can effectively balance the requirements of crack resistance and the strength of the base layer of the brick, and meet the needs of stability, safety, and durability of the insulation system.

The welded mesh is made of high-quality low-carbon steel wire and processed into shape through automated precision and accurate mechanical equipment spot welding. It is then subjected to surface treatment using zinc dipping technology and produced according to conventional British standards. The mesh surface is smooth and neat, the structure is sturdy and uniform, and the overall performance is good. Even if it is partially cut or subjected to pressure, it will not loosen. It is the most corrosion-resistant mesh in the entire iron mesh and one of the most widely used types of iron mesh. Its high-quality anti-corrosion properties make it highly favored in the animal husbandry industry. The smooth and neat mesh surface increases the appearance and can play a certain decorative role. This characteristic also makes it perform well in the mining industry. Due to the use of low-carbon and high-quality materials as raw materials, it is unique. General iron mesh does not have flexibility, and it has been determined. Its plasticity during use, Thus, it can be used for deep processing and manufacturing in hardware technology, batch swinging of complex walls, underground leak and crack prevention, lightweight mesh body, making the cost much lower than that of iron mesh, and better realizing its economic and practical benefits.